|
C-Cut Advanced Management
|
|
|
C-Cut
has the option to automatically update the parts in the nesting
with the modified parts in the Models.
|
|
|
All
cutting attributes in C-Cut are parametric. Any cutting attribute value
can be replaced by a parameter that represents a table of
values. For example: Offset
between parts as an attribute of material and thickness specifications.
|
|
|
After
defining an attribute, the user can set a table of values for that
attribute in C-Cut or Excel. For example: Lead length as an attribute
of material and thickness specifications table.
|
|
|
Parameters
of federates
and Kerf for all the major Plasmas are
included in C-Cut. They are used
in any stage of the cutting, with % slow dawns and height sensor control,
at any distance of cutting small holes, corners and small arcs in the
parts.
|
|
|
Small
holes are treated
as a special category in C-Cut, with special Leads and special commands
that are modified according to the type of plasma, material and
thickness. Cutting of corners
can be controlled at different ranges of angles..
|
|
|
Cutting
command can be modified according to the area of the part, or hole,
also according to the complexity of the part, or hole..
|
|
|
The
user can create, or modify, reports for weight and cost calculations.
Cost parameters are displayed all through the program, and the user can create
and add his own computations.
|
